Tillage type
Field cultivator, secondary tillage
Sunflower tillage equipment ยท 2000s to present
Sunflower 5035 Field Cultivator
Sunflower 5035 Field Cultivator is a three-section secondary-tillage field cultivator for seedbed preparation. Available from 18 ft 6 in to 36 ft 6 in, it uses closely spaced sweeps to loosen shallow soil, uproot small weeds, level the field, and prepare a planting surface.
Working width
18 ft 6 in to 36 ft 6 in
Working depth
Typically about 2 to 6 in
Production years
2000s to present
Sunflower 5035 Field Cultivator specifications
| Tillage type | Field cultivator, secondary tillage |
|---|---|
| Working width | 18 ft 6 in to 36 ft 6 in |
| Working depth | Typically about 2 to 6 in |
| Production years | 2000s to present |
| Number of shanks | 37 to roughly 73 |
| Blade/shank spacing | 6 in shank spacing |
| Frame type | Three-section folding pull-type frame |
| Horsepower required | About 4 to 7 hp per ft |
| Approx. weight | About 6,000 to 10,450 lb |
What the 5035 Field Cultivator is used for
The 5035 is used for secondary tillage ahead of planting, often after prior primary tillage. Its sweeps loosen and level shallow soil while rear harrow or finishing attachments break clods and distribute residue. It is not intended for deep compaction removal.
Why the Sunflower 5035 Field Cultivator stands out
The four-rank shank arrangement and 6 in spacing provide full-width shallow cultivation. Flexible sections, flotation, and single-point depth control help the machine follow ground contours and maintain a consistent working depth.
Buying a used Sunflower 5035 Field Cultivator
Inspect sweeps, shank standards, springs or trip assemblies, and shank mounting bolts for wear or damage. Check the depth-control linkage, wing hinges, hydraulic cylinders, and rear harrow or reel bearings. Examine walking-beam pivots, tires, hubs, and frame welds, particularly around folding sections.
Sunflower 5035 Field Cultivator frequently asked questions
What is the 5035 mainly used for?
It is used for shallow secondary tillage and seedbed preparation before planting.
How close are the shanks spaced?
The 5035 uses 6 in shank spacing.
How much tractor power is needed?
A common requirement is about 4 to 7 hp per ft, depending on depth, soil, and finishing attachments.
Specifications are commonly cited figures for general reference; exact figures vary by year and serial number, so confirm against TractorData.com and the machine's records. Values and prices of used tillage equipment vary by condition, use, and region. Page updated Aug 4, 2026.