Tillage type
Disk ripper, combination disc-chisel tool
Sunflower tillage equipment ยท 2000s to present
Sunflower 4511 Disk Ripper
Sunflower 4511 Disk Ripper is a primary-tillage disc-chisel and disk-ripper combination tool. Models span 11 ft 3 in to 18 ft 9 in working widths, using discs and closely spaced shanks to size residue, loosen soil, and level the pass.
Working width
11 ft 3 in to 18 ft 9 in
Working depth
Typically about 6 to 12 in
Production years
2000s to present
Sunflower 4511 Disk Ripper specifications
| Tillage type | Disk ripper, combination disc-chisel tool |
|---|---|
| Working width | 11 ft 3 in to 18 ft 9 in |
| Working depth | Typically about 6 to 12 in |
| Production years | 2000s to present |
| Number of shanks | 9 to 15 |
| Number of blades | About 28 to 42 total, depending on model |
| Disk blade size | Approximately 22 in |
| Blade/shank spacing | 15 in shank spacing; 12 in front and 10.5 in rear blade spacing |
| Horsepower required | 25 to 30 hp per shank |
| Approx. weight | About 13,160 to 17,900 lb |
What the 4511 Disk Ripper is used for
The 4511 is used for primary tillage in crop residue, especially when a farm wants disc cutting and shank tillage in one pass. The front discs cut residue, the shanks loosen and mix soil, and the rear discs help level the disturbed soil. A lighter spring pass may still be used where a finer seedbed is needed.
Why the Sunflower 4511 Disk Ripper stands out
The close 15 in shank spacing gives more complete tillage than widely spaced ripper designs. Front and rear disc sections improve residue handling and surface leveling around the chisel shanks.
Buying a used Sunflower 4511 Disk Ripper
Check shank trip mechanisms, points, twisted shovels, and shank standards for wear or damage. Inspect front and rear disc blades, bearings, gang bolts, and scrapers. Test hydraulic lift and depth control, then inspect tires, hubs, and the frame for cracks around disc and shank mounts.
Sunflower 4511 Disk Ripper frequently asked questions
How many shanks are available on the 4511?
Published 4511 sizes use 9, 11, 13, or 15 shanks.
What power requirement should be expected?
Sunflower lists about 25 to 30 hp per shank, with depth and soil type affecting draft.
Is the 4511 a disc harrow?
No. It is a combination primary-tillage machine with disc sections and chisel-type shanks.
Specifications are commonly cited figures for general reference; exact figures vary by year and serial number, so confirm against TractorData.com and the machine's records. Values and prices of used tillage equipment vary by condition, use, and region. Page updated Aug 4, 2026.