Production years
1970s-1980s
John Deere grain drill ยท 1970s-1980s
John Deere 8200 Grain Drill
The John Deere 8200 is an older end-wheel grain drill from the 1970s and 1980s, not the later 8200 tractor. It is a conventional single-disc drill commonly seen in 8-, 10-, 12-, and larger-row configurations and remains popular for economical small-grain seeding in worked ground.
Working width
Commonly 8, 10, 12, or 16 ft; confirm configuration
Row spacing
Commonly 7, 8, or 10 in.
Number of openers/rows
Common examples: 18 rows at 8 in.; 16 rows at 10 in.
John Deere 8200 specifications
| Production years | 1970s-1980s |
|---|---|
| Drill type | End-wheel grain drill |
| Working width | Commonly 8, 10, 12, or 16 ft; confirm configuration |
| Row spacing | Commonly 7, 8, or 10 in. |
| Number of openers/rows | Common examples: 18 rows at 8 in.; 16 rows at 10 in. |
| Opener type | Single-disc |
| Seed and fertilizer boxes | Grain box; grass-seed attachment commonly fitted |
| Weight (approximate) | About 1,300-2,000 lb for common widths; confirm by configuration |
What the 8200 is used for
The 8200 was intended for wheat, oats, barley, rye, and forage or grass seed in a prepared seedbed. Its single-disc openers are suited to conventional tillage and modest residue, not sustained operation in heavy no-till residue.
It remains useful to acreage owners who want a simple, ground-driven grain drill with a grass-seed option. Well-maintained machines can establish cover crops after light tillage, but a dedicated no-till drill is better for demanding residue conditions.
Why the John Deere 8200 stands out
The 8200's attraction is mechanical simplicity and an abundant used-market presence. Its end-wheel layout, single-disc openers, and basic seed-metering system make it familiar to repair, but its performance depends heavily on opener condition and correct setup.
Buying a used John Deere 8200
Measure disc diameter and inspect bearings, hub mounting, scrapers, seed boots, and seed tubes. Check the drive tire size because it affects ground-drive calibration, then inspect drive chains, sprockets, feed cups, box rust, grass-seed drive, and any press-wheel or drag-chain attachments. Verify the exact row count and spacing rather than relying on the model name.
John Deere 8200 frequently asked questions
Is a John Deere 8200 drill a no-till drill?
No. It is a conventional single-disc grain drill and is best suited to prepared ground.
What widths were common?
Eight-, 10-, 12-, and 16-foot versions are commonly encountered, with row count and spacing varying by drill.
Can parts still be found?
Many general wear parts are available, but verify the disc, hub, boot, and meter part numbers before committing to a restoration.
Specifications are commonly cited figures for general reference; exact figures vary by year and serial number, so confirm against TractorData.com and the machine's records. Values and prices of used grain drills vary by condition, use, and region. Page updated Aug 4, 2026.