Harman US
John Deere tractor ยท 1976-1982

John Deere 2440 Tractor

The John Deere 2440 is a 1976-1982 utility tractor with a 3.6 L four-cylinder diesel engine and 60.65 hp PTO output. With independent 540/1,000-rpm PTO, closed-center hydraulics, and about 4,750 lb shipping weight, it is a capable vintage utility tractor.

Production years
1976-1982
Engine
John Deere 3.6 L liquid-cooled four-cylinder diesel
Power
60.65 hp claimed and tested PTO; 52.3 hp claimed drawbar
Weight approx.
4,750 lb shipping weight

John Deere 2440 specifications

Production years1976-1982
TypeTwo-wheel-drive utility tractor
EngineJohn Deere 3.6 L liquid-cooled four-cylinder diesel
Fuel typeDiesel
Power60.65 hp claimed and tested PTO; 52.3 hp claimed drawbar
TransmissionEight-speed collar shift, 16-speed two-speed power shift, or eight-speed power shuttle
PTOIndependent rear 540/1,000 rpm
Weight approx.4,750 lb shipping weight

What the 2440 is used for

The 2440 is suited to loader work, hay and forage tasks, mowing, and general utility work where a roughly 60-PTO-hp tractor is appropriate. Its Category II/I rear hitch supports a broad range of compatible implements.

Its independent dual-speed PTO and closed-center hydraulic system make it especially useful for PTO and hydraulic implements. Two-wheel drive means tire condition, ballast, and worksite traction deserve attention when using a loader or pulling draft loads.

Why the John Deere 2440 stands out

The 2440 combines planetary final drives, mechanical rear differential lock, power steering, and hydraulic wet-disc brakes. It was built in Dubuque, Iowa, and Mannheim, Germany.

Buying a used John Deere 2440

Verify the transmission option, factory origin, and rear-PTO operation, then operate the hydraulic system and brakes when the tractor is fully warm. Check the serial-number plate on the right side of the frame above the front axle, and inspect the hydraulic couplers, hitch, and front axle closely if the tractor has had loader service.

John Deere 2440 frequently asked questions

How much PTO power does a John Deere 2440 have?

The John Deere 2440 is rated at 60.65 hp at the PTO.

Does the John Deere 2440 have independent PTO?

Yes. It has an independent 540/1,000-rpm rear PTO.

What engine is used in the John Deere 2440?

It uses a 3.6 L liquid-cooled four-cylinder John Deere diesel engine.

Specifications are commonly cited figures for general reference; exact figures vary by year and serial number, so confirm against TractorData.com and the machine's records. Values and prices of used tractors vary by condition and region. Page updated Aug 4, 2026.

Other John Deere tractors