International Harvester 1086 Tractor
The International Harvester 1086 is a 1976-1981 row-crop tractor with 130 hp claimed PTO power and a 6.8 L six-cylinder diesel. It is designed for substantial PTO, hay, and tillage work, with a standard air-conditioned cab on most examples.
International Harvester 1086 specifications
| Production years | 1976-1981 |
|---|---|
| Engine | International Harvester 6.8 L, 6-cylinder diesel |
| Power | 114 hp claimed drawbar; 130 hp claimed PTO |
| Transmission | 8-speed gear or 16-speed Torque Amplifier two-speed power shift |
| Weight, approx. | 12,300 lb shipping; 12,715 lb 2WD operating |
| Fuel type | Diesel |
| PTO | Independent 540/1,000 rpm rear PTO |
| Hydraulics | Open-center, 22.5 gal capacity; 12 gpm pump flow |
What the 1086 is used for
The 1086 is sized for demanding field work, large hay tools, and high-load PTO applications. Its claimed 130 PTO hp and roughly 12,700 lb 2WD operating weight place it well above utility-tractor duties.
The standard cab includes air conditioning, while open-station and four-post ROPS versions were available. Two- and four-wheel-drive configurations were offered, so tire, axle, and front-end configuration should match the intended work.
Why the International Harvester 1086 stands out
The 1086 was built in Rock Island, Illinois, and International Harvester produced 47,420 units. It combines a 6.8 L diesel with either an 8-speed gearbox or a 16-speed TA transmission, Category III hitch, and independent 540/1,000 rpm PTO.
Buying a used International Harvester 1086
Test the Torque Amplifier under a meaningful load and make sure it shifts and holds in both ranges without slipping. Inspect cab air-conditioning operation, hydraulic outlets and hitch response, brakes, clutch adjustment, front axle or drive components as fitted, and the condition of the 90-quart transmission-hydraulic oil system.
International Harvester 1086 frequently asked questions
How much PTO power does an International Harvester 1086 have?
It has 130 hp claimed PTO power. TractorData lists 131.41 hp tested PTO power.
What engine is in an International Harvester 1086?
It uses an International Harvester 6.8 L six-cylinder diesel engine.
Was four-wheel drive available on the 1086?
Yes. The 1086 was available in two- or four-wheel-drive configurations.
Specifications are commonly cited figures for general reference; exact figures vary by year and serial number, so confirm against TractorData.com and the machine's records. Values and prices of used tractors vary by condition and region. Page updated Aug 4, 2026.