Tillage type
Vertical tillage tool
John Deere tillage equipment ยท Late 2010s to present
John Deere 2660VT Vertical Tillage
John Deere 2660VT Vertical Tillage is a high-speed vertical-tillage tool for sizing residue, lightly mixing the surface, and preparing a level seedbed. It is available from about 14 ft 4 in. to 49 ft 6 in. wide and is designed for shallow operation with adjustable gang angle.
Working width
14 ft 4 in. to 49 ft 6 in.
Working depth
Up to 4 in.
Production years
Late 2010s to present
John Deere 2660VT Vertical Tillage specifications
| Tillage type | Vertical tillage tool |
|---|---|
| Working width | 14 ft 4 in. to 49 ft 6 in. |
| Working depth | Up to 4 in. |
| Production years | Late 2010s to present |
| Number of blades | Varies by working width |
| Disk blade size | 22 in. |
| Blade/shank spacing | 7.25 in. blade spacing |
| Frame type | Pull-type, one-section, three-section, or five-section folding frame |
| Horsepower required | Typically 10 to 14 engine hp per ft |
What the 2660VT Vertical Tillage is used for
The 2660VT is used for shallow, high-speed residue cutting and sizing, light soil conditioning, and surface leveling. At low gang angles it can minimize soil movement, while increased angle adds mixing action. Rear rolling baskets help firm and finish the surface in the same pass.
Why the John Deere 2660VT Vertical Tillage stands out
Its gangs can be set from 0 to 12 degrees, allowing the operator to vary soil movement and residue mixing. The 22-inch blades on 7.25-inch spacing provide close residue-cutting coverage, and the rear basket system adds leveling and consolidation.
Buying a used John Deere 2660VT Vertical Tillage
Inspect each blade for wear, cracks, and looseness, and verify that gang bearings and gang-angle components operate smoothly. Check basket bearings, basket bars, wing hinges, hydraulic cylinders, tires, and depth-control hardware. Confirm that any TruSet depth-control equipment functions correctly before purchase.
John Deere 2660VT Vertical Tillage frequently asked questions
How deep does a 2660VT operate?
Its published maximum operating depth is up to 4 inches, but vertical-tillage passes are commonly run shallower.
What does gang angle change on a 2660VT?
A lower angle reduces soil movement, while a higher angle increases cutting, mixing, and surface disturbance.
How much power does a 2660VT require?
John Deere lists about 10 to 14 engine hp per foot, with needs affected by depth, gang angle, soil, and speed.
Specifications are commonly cited figures for general reference; exact figures vary by year and serial number, so confirm against TractorData.com and the machine's records. Values and prices of used tillage equipment vary by condition, use, and region. Page updated Aug 4, 2026.